Header wrapped the intake.
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. I wanted to get rid of the homedepot look.
I wrapped over the aluminum tape so hopefully that will help too.
Also, the hose clap that is holding the wrap at the bottom doubled as a support. The screw part is holding it up so the pipe isn't sagging like it is in the first pic.
Haro, come on man, my mom is the coolest when it comes to christmas.
I wrapped over the aluminum tape so hopefully that will help too.
Also, the hose clap that is holding the wrap at the bottom doubled as a support. The screw part is holding it up so the pipe isn't sagging like it is in the first pic.
Haro, come on man, my mom is the coolest when it comes to christmas.
#9
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.
If you want to know about the pipe, it'* a 3.5" OD stainless flowmaster U bend that I cut and welded.
And I got the header wrap from ebay. It'* 2"x50' and I used all of it.
Here'* a link:
http://cgi.ebay.com/ebaymotors/Heade...26758754QQrdZ1
If you want to know about the pipe, it'* a 3.5" OD stainless flowmaster U bend that I cut and welded.
And I got the header wrap from ebay. It'* 2"x50' and I used all of it.
Here'* a link:
http://cgi.ebay.com/ebaymotors/Heade...26758754QQrdZ1