Custom Enclosure Part 2-Finished
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: The South
Posts: 3,281
Likes: 0
Received 0 Likes
on
0 Posts
Custom Enclosure Part 2-Finished
If you are new to what i have done, you might want to check out this thread:
http://www.bonnevilleclub.com/forum/...ic.php?t=35901
For those people who have seen that thread:
Here is the finished product of the boxes and amp and wiring relocation.
This is the first box, after being carpeted.
Here is where I sat the covered box next to the other uncovered one, with the amp still temp. wired.
Here is the second box.
This is with both covered boxes in the car, with the amp still temp. wired.
Here, is the final install. Some of these pics turned out blury. I mounted the amp above the left box, like 1993SLE and a few others have done. I then hid the wiring behind the plastic part there.
This is the completed mod/upgrade/install. I welcome your comments. I also added a second in-line fuse to the positive amp wire today, because I had put mine in my trunk, when I learned you need one less than a foot from the battery. Hope you enjoy the pics!
thanks!
http://www.bonnevilleclub.com/forum/...ic.php?t=35901
For those people who have seen that thread:
Here is the finished product of the boxes and amp and wiring relocation.
This is the first box, after being carpeted.
Here is where I sat the covered box next to the other uncovered one, with the amp still temp. wired.
Here is the second box.
This is with both covered boxes in the car, with the amp still temp. wired.
Here, is the final install. Some of these pics turned out blury. I mounted the amp above the left box, like 1993SLE and a few others have done. I then hid the wiring behind the plastic part there.
This is the completed mod/upgrade/install. I welcome your comments. I also added a second in-line fuse to the positive amp wire today, because I had put mine in my trunk, when I learned you need one less than a foot from the battery. Hope you enjoy the pics!
thanks!
#2
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
awsome!!!
the only thing that concerns me is this
it looks like the wire is just comming out the back of the box and it is not sealed. You need to seal that.
the only thing that concerns me is this
it looks like the wire is just comming out the back of the box and it is not sealed. You need to seal that.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: The South
Posts: 3,281
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by corvettecrazy
awsome!!!
the only thing that concerns me is this
it looks like the wire is just comming out the back of the box and it is not sealed. You need to seal that.
the only thing that concerns me is this
it looks like the wire is just comming out the back of the box and it is not sealed. You need to seal that.
-thanks for the comment too
#7
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: The South
Posts: 3,281
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by L27Buick
it looking better. what brand are those subs?
Thread
Thread Starter
Forum
Replies
Last Post
alexcoqui
Detailing & Appearance
47
09-09-2007 08:35 AM
Peterg22000
Detailing & Appearance
67
02-16-2007 12:56 AM
VigCS
Audio (and aftermarket electronics)
11
12-06-2005 09:23 PM
Lowrider0308
Your Ride: GM Pictures & Videos
28
06-13-2005 10:05 PM