yes I dont feel like re making my post so I am going to copy what I posted on a different forum.
Yes I happend to have both on hand and told my friend to come over and take some pictures for me.
First lets start with stats.
Red 20Ma / 8000mcd / 2.6max voltage / 30deg. Viewing angle / 628wavelength (nm)
running at 2.1 volts (used supplied resistor to reduce from 12 volts)
Superflux HPWT MD00 F4000
red 70ma / 3lumen / 70deg viewing angle / 3volt max /
running at 2.4 volts (5 LED series from 12 volts)
held same distance from wall
held same distance from wall, as parallel to the wall as possible
2nd 3rd brake light project...
yes it will be on a voltage regulator, and yes its freaking bright, and no, you can't have it. :tonqe: This is my 2nd one, because the first one I do not like the pattern of the LED'*.
first superflux TL. (superflux on right, stock on left) (note: the plastic trip piece is not on either of them, so some of the stock brightness is the actual bulb, which you dont see when on the car) (note2: that is not my basement, and not my big mess)