Originally Posted by PontiacDad
Looks sharp mremer
The white neon looks good with silver. How did you wire everything?
I used dental floss to wire everything.
The driving portion of the Angel eyes I wired to the factory fog-light switch. For the Angel Eye portion I used a seperate switch, as well as the two neons. I mounted the switches in the compartment that would house the HUD controls if equiped. Looks good, cut some lexan to mount the switches on, I am going to use black photo paper to mount behind the lexan and print the words "Eyes" and "Neons" so they appear above the switches, then mount an LED/Lamp behind the fabricated panel so when the dash comes on (when the lights are on) the words are lit-up...
I ran the wire up to the dash, then ran power from the rear fuse box (low amperage).
Originally Posted by 97NAbonneville1
Where did you mount them?
I mounting the driving lights where the factory fogs were. The neons I mounted behind and below the center grill. I can take a pic of them if you are really interested. Since I was'nt feeling that great on saturday I opted out of doing my standard photo walk through...