SSEi engine Ho-age pix
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: In your garage, swipin' da lug nutz
Posts: 3,067
Likes: 0
Received 1 Like
on
1 Post
SSEi engine Ho-age pix
Got some new "additions" to the engine...some cosmetic, but I think all of them have a function
I put a torque mount on the car that came from Dons new motor...thought somehow I can use it. Right now, it serves as routing for my ignition wires, but it will also serve as a fuel pressure gauge mount later on. In this pic, you can also see how I addressed my issue on vapor purge...again, a leftover from Dons engine, and yes...it works well.
Money shot of my new 140 amp alt...only cost me 30 bucks
Nearly completed FWI
Also did the fan bypass mod...can anyone see where I put the switch?
I put a torque mount on the car that came from Dons new motor...thought somehow I can use it. Right now, it serves as routing for my ignition wires, but it will also serve as a fuel pressure gauge mount later on. In this pic, you can also see how I addressed my issue on vapor purge...again, a leftover from Dons engine, and yes...it works well.
Money shot of my new 140 amp alt...only cost me 30 bucks
Nearly completed FWI
Also did the fan bypass mod...can anyone see where I put the switch?
#3
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Looking good, i've always liked that shield over the SC on the series ones. It makes the plug wire routing look a lot more clean. Hope you don't plan on smoking in the car any time soon.
#8
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2004
Location: In your garage, swipin' da lug nutz
Posts: 3,067
Likes: 0
Received 1 Like
on
1 Post
Thanks for the comments guys n' gals
Unfortunately, I'm not going to be able to ho out the exterior too much until I get new tires. It seems like I, uh, accelerated the wear to the right front tire, causing one of the belts to let go. So now I have a full sized spare up front...but...it'* on a steelie rim, which is half-painted white to see how that rim would look. It'* ghettoriffic.
Unfortunately, I'm not going to be able to ho out the exterior too much until I get new tires. It seems like I, uh, accelerated the wear to the right front tire, causing one of the belts to let go. So now I have a full sized spare up front...but...it'* on a steelie rim, which is half-painted white to see how that rim would look. It'* ghettoriffic.
#9
Guest
Posts: n/a
Looking good buddy... I don't even remember you taking from the Pile...LMAO...
That 140Amp fits right in...
Brad got his Alt for $30 and I got my Compressor for $46... We had a decent Yard day...
Car is slowly looking better and better... After that Trans Build, it doesn't have any issues with lighting em up
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
That 140Amp fits right in...
Brad got his Alt for $30 and I got my Compressor for $46... We had a decent Yard day...
Car is slowly looking better and better... After that Trans Build, it doesn't have any issues with lighting em up
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post
Merlin 91/97
Your Ride: GM Pictures & Videos
14
05-22-2005 01:07 PM
BonneMeMN
Your Ride: GM Pictures & Videos
8
07-26-2003 09:49 PM