Idle air control, (IAC) plug test
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Idle air control, (IAC) plug test
Locate your IAC on the throttle body. Remove the plug by lifting on the tab and then wiggle while pulling on the plug. Pull on the plug, not the wires.
Look for any corrosion or damage to the plug or terminals. Clean or repair if needed.
Look for any corrosion or damage to the plug or terminals. Clean or repair if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Soft Ride
Normal Maintainence
0
02-22-2014 10:17 PM