MAF voltage test
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
MAF voltage test
Your MAF plug is located on the throttle body. Lift tab(underneath) and wiggle while pulling the plug, not the wires.
Now take your multimeter and put the red probe on the pink wire and the black probe on the center black wire, with the key at the run position, with engine off
You should get battery voltage.
Now take your multimeter and put the red probe on the pink wire and the black probe on the center black wire, with the key at the run position, with engine off
You should get battery voltage.
Thread
Thread Starter
Forum
Replies
Last Post