Knock sensor replace
10-15-2009, 01:53 PM
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Knock sensor replace
You have two knock sensors on your engine, one in the front near the starter.
And another near the rear of the engine, near the center between the cross member and oil pan.
You will need a deep well socket 22mm, but a 7/8 will also work, a swivel and a extension to get these out. You will need to drain the cooling system to change the sensors.
And another near the rear of the engine, near the center between the cross member and oil pan.
You will need a deep well socket 22mm, but a 7/8 will also work, a swivel and a extension to get these out. You will need to drain the cooling system to change the sensors.
Thread
Thread Starter
Forum
Replies
Last Post
streetracer
Performance, Brainstorming & Tuning
1
08-18-2003 01:08 PM