What I've been working on... Turbo GP SOLD!
#12
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, my cellphone camera kinda sux.
This was last night. Left to do is the tensioner pulley and alternator, starter, downpipe, and fluids. I am also having a hard time with the vaccuum lines. There is a T coming off of the throttle body, one end goes to the evap but I cant figure out where the other end goes.
Hope to have it fire up tonight.
This was last night. Left to do is the tensioner pulley and alternator, starter, downpipe, and fluids. I am also having a hard time with the vaccuum lines. There is a T coming off of the throttle body, one end goes to the evap but I cant figure out where the other end goes.
Hope to have it fire up tonight.
#14
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
Help quick!
Just went to start it and got no fire.
There is no spark... I checked the wiring and found that the ground wire had snapped off. I fixed the ground and I still have no spark! What do I need to check?
Just went to start it and got no fire.
There is no spark... I checked the wiring and found that the ground wire had snapped off. I fixed the ground and I still have no spark! What do I need to check?
#16
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
I was referring to the ground that comes off of the icm harness...
I found out what the problem is... I hooked up a scanner and I get no rpm reading while cranking. This means that the CPS is bad or not working right. I figure it'* because i bent two fins on the crank pulley when I was installing it. While I bent them back, apparently i didn't do it well enough because the cps isn't reading it.
I found out what the problem is... I hooked up a scanner and I get no rpm reading while cranking. This means that the CPS is bad or not working right. I figure it'* because i bent two fins on the crank pulley when I was installing it. While I bent them back, apparently i didn't do it well enough because the cps isn't reading it.
#17
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
It looks like I'll be pulling the engine back out of the car tomorrow. Im going to pull the crank pulley off again and verify that the fins are straight, I'm also going to swap the CPS for one that I know works.
this sucks :(
this sucks :(
#18
Senior Member
Posts like a Supercharger
Join Date: Jul 2010
Location: Chillicothe mo
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear about that! :(
And fwiw, l32 Valve covers wont work on a l67 because the l67'* injectors are in the heads so the valve cover is Built differently for it.
And fwiw, l32 Valve covers wont work on a l67 because the l67'* injectors are in the heads so the valve cover is Built differently for it.
#20
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts