need little help w/drive axles.
#1
Senior Member
Posts like a Supercharger
Thread Starter
need little help w/drive axles.
hey guys, need lil help w/drive axles before i go nuts and do some damage to them. 96 SSEi, all moves away, trying to take axles out, wont come out. do i pry on it from the back btween it and trasmission or ???? i know it have some kinda pin but i cant see crap there. also, whatever id had to do, will both sides be similar in steps? cause i know one axle suppose to be female type fit and other male.
thks
thks
#3
Senior Member
Posts like a Supercharger
Thread Starter
I try looking between and I can't see crap. Are u talking about snap ring that inside tr trasm on the shaft itself or something out in between trans and axle? I can't see nothing, and just curious if I pry axle of withough bein worried to damage trasm:/?
#4
Senior Member
True Car Nut
its inside, it has to compress on the axle shaft to get past the groove it sits in inside the trans if you have to pry dont rest the bar on the seal
#5
Retired
You can stick a large screwdriver between the axle and the transmission to pry it out. And yes, those clips and be a pain. Be persistent grasshopper!! Fight the power!!
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#6
Senior Member
Posts like a Supercharger
Thread Starter
Lol mike, thanks guys. I though I have to push and pull just wanted to verify that'* for sure, didn't want to push and then after its to late find out that it had weird design. U know like once I set in some Japan car, I couldn't pull key out, I though wtf? Called owner and was told there'* a button under steering, u push and then Pull key out. Lol
Thanks again guys, I'm Gona go push and pull on both sides now lol
Thanks again guys, I'm Gona go push and pull on both sides now lol
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
Lounge
3
05-25-2011 06:53 AM