1995 bonneville supercharger knock
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2010
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
1995 bonneville supercharger knock
I recently had the nose bearing in the supercharger replaced. After about 500 miles of driving the car started loosing power and then starting heating up and knocking bad. I believe the knocking is coming from the supercharger and the nose cone bearing that was replaced may have broke.
Can someone tell me if i can replace the nose cone bearing with out removing the supercharger. It is the phase 1 3800 engine.
Can someone tell me if i can replace the nose cone bearing with out removing the supercharger. It is the phase 1 3800 engine.
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
You will need to remove the snout to change the bearing. And I don't believe that can be done on the engine with a series 1. Remove the belt first, then check for play with the pulley. Turn it back and forth, if there'* play, then it'* the coupler that is the problem.
Thread
Thread Starter
Forum
Replies
Last Post
streetracer
Performance, Brainstorming & Tuning
1
08-18-2003 01:08 PM