400 wont start
#1
400 wont start
has a 400 6.6l big block.
its time to #1 at tdc on compression stroke.
all cylinders pull about 125lbs of compression on guage.
new points set and new condenser.
fuel pump works. fuel squirts out of the carb when its cranking and i think its flooding it out but i could be wrong. starting fluid or not all i can get is a few kicks out of it.
its time to #1 at tdc on compression stroke.
all cylinders pull about 125lbs of compression on guage.
new points set and new condenser.
fuel pump works. fuel squirts out of the carb when its cranking and i think its flooding it out but i could be wrong. starting fluid or not all i can get is a few kicks out of it.
#3
Member
Posts like a V-Tak
Join Date: Apr 2011
Location: Ohio
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
for starters there is know such thing as a BBP the 350 all the way up the line to the 455 is the same block.
I see this is a old thread ,,,, I just wanted to let you know about the Pontiac engine size.
sorry ,, pet peeve
I see this is a old thread ,,,, I just wanted to let you know about the Pontiac engine size.
sorry ,, pet peeve
Thread
Thread Starter
Forum
Replies
Last Post