ZZP headers bolt to a Hogan dp?
#2
Member
Posts like a V-Tak
Thread Starter
Guess I should elaborate a little more. I have the Hogan catted dp on the car on the stock manifolds and the headers are at my parents so i can't get a good comparison to see. Another question, has anyone put ZZP headers on a h-body? Sorry couldn't find the edit button.
#4
Senior Member
True Car Nut
Join Date: Jun 2007
Location: New Lenox, IL
Posts: 2,478
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.com/ebaymotors/97-03...Q5fAccessories
I have them on my 95 Regal, Anthony has them on his 99 GTP, and I know a few other people who have them as well. They're SLP knockoffs, and are made by a guy from clubgp.com. They are of VERY high quality, and I can post detailed pictures later tonight if you need them. The welds are very well done, very clean, and these don't leak. I've put a little over 5000 miles on mine now.
On top of that, they come with a 3" downpipe. Not sure what you h-body guys need to do as far as downpipe fitment goes, but that might be something to consider.
#8
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
Hey, welcome to our forum! How are you?
Downpipe: Hogan & TOG
I also had a Hogan downpipe, but I had to take it out & sell it because it does not bolt up. You do need a TOG downpipe due to different length, angle, etc.
Will they work?
Yes, they will work, and they are awesome! They're said to be the best out there, and they are easy to install. I have a welded-solid front transmission mount, and it'* a bit too tall, so the downpipe touches the subframe. I'll get that fixed, but you will not have any problems with either a stock mount or one that doesn't exceed the height of stock and will not compress.
ZZP headers on an H-body
The ZZP headers have the same dimensions as the TOG headers for the most part, and this tells me they will work. Not only that, but we have more engine bay room than some GP guys. The 92-99 H-body guys have a strut that'* part of the front trans mount, and it will rub against the headers if it isn't shaved down a bit. In a 2000+ H-body, it'* smooth sailing.
Have fun, and please post some pictures!
Downpipe: Hogan & TOG
I also had a Hogan downpipe, but I had to take it out & sell it because it does not bolt up. You do need a TOG downpipe due to different length, angle, etc.
Will they work?
Yes, they will work, and they are awesome! They're said to be the best out there, and they are easy to install. I have a welded-solid front transmission mount, and it'* a bit too tall, so the downpipe touches the subframe. I'll get that fixed, but you will not have any problems with either a stock mount or one that doesn't exceed the height of stock and will not compress.
ZZP headers on an H-body
The ZZP headers have the same dimensions as the TOG headers for the most part, and this tells me they will work. Not only that, but we have more engine bay room than some GP guys. The 92-99 H-body guys have a strut that'* part of the front trans mount, and it will rub against the headers if it isn't shaved down a bit. In a 2000+ H-body, it'* smooth sailing.
Have fun, and please post some pictures!