Zilla's rebuild (exhaust mod revealed, gauges going in.....)
#342
Senior Member
True Car Nut
Join Date: Aug 2003
Location: Salina, KS
Posts: 5,246
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
initial tightening of the bolt, offset the rocker arm SLIGHTLY OPPOSITE the tightening rotation of the bolt. Some of us call that counter-clockwise. The target for misaligning (yes, deliberately) the rocker is HALF OFF the head of the valve stem.
Awsome work, Will!! Very nice record you're keeping here.
#343
Guest
Posts: n/a
Great work Bill... Looking better every day...
We better have the fire up video from the Sony Cam...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
We better have the fire up video from the Sony Cam...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#344
Junior Member
Posts like a Ricer Type-R
Thread Starter
Would you believe I just wasted 20 minutes looking for my PCV valve?
It was in last year'* supercharger the whole time.
Creeping up on finishing. TB going on next.
It was in last year'* supercharger the whole time.
Creeping up on finishing. TB going on next.
#346
Junior Member
Posts like a Ricer Type-R
Thread Starter
Taking a break. I have a few pics to post late tonight or early tomorrow. Can't find the two bolts that hold the MAP sensor bracket to the rear cylinder head now. That may have to wait for now.
#348
Junior Member
Posts like a Ricer Type-R
Thread Starter
Tonight was not what I'd hoped. I had some delays. Broken fuel line clips, and a couple missing fasteners, then searching for the 'missing' PCV that I found in last year'* SC. What an odd place to find one!
Anyway, I did get a few things off the punchlist. This is the stage where you get alot done, but it doesn't look like you did.
Here'* the pics:
Installed tonight:
Heater hoses
Alternator
MAP sensor
Throttle body and sensors
Thermostat
6 side-gapped and indexed spark plugs and wires
EGR
Fuel lines
BCS
BCA
And a buncha other misc stuff.
Anyway, I did get a few things off the punchlist. This is the stage where you get alot done, but it doesn't look like you did.
Here'* the pics:
Installed tonight:
Heater hoses
Alternator
MAP sensor
Throttle body and sensors
Thermostat
6 side-gapped and indexed spark plugs and wires
EGR
Fuel lines
BCS
BCA
And a buncha other misc stuff.