Zilla's rebuild (exhaust mod revealed, gauges going in.....)
04-14-2007, 11:52 PM
#271
Junior Member
Posts like a Ricer Type-R
Thread Starter
Took the day off for a little injector fun at FIE:
http://www.bonnevilleclub.com/forum/...=852233#852233
http://www.bonnevilleclub.com/forum/...=852233#852233
04-15-2007, 12:02 AM
#272
Senior Member
True Car Nut
Join Date: Mar 2005
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
They've been soaking in oil since late December. In fact, dillcc saw them soaking on his western circle tour. 
This was the same vat of oil and parts that the Satan Kitten that I was babysitting fell into on Xmas.
But I ALSO used GM cam and lifter pre-lube. All contact and pivot points. Each point will get another drop or two just before the LIM goes on.
This was the same vat of oil and parts that the Satan Kitten that I was babysitting fell into on Xmas.But I ALSO used GM cam and lifter pre-lube. All contact and pivot points. Each point will get another drop or two just before the LIM goes on.
Fun trip today looks like too.
04-15-2007, 12:05 AM
#273
Junior Member
Posts like a Ricer Type-R
Thread Starter
That'* the little bastard alright. Wasn't he here when you were? He'* a big sucker now. Maine Coon breed.
Tomorrow starts the LIM and SC. FOR SURE. Depending on how my hand recovers from today'* work at FIE, I may get them done.
Tomorrow starts the LIM and SC. FOR SURE. Depending on how my hand recovers from today'* work at FIE, I may get them done.
04-15-2007, 12:08 AM
#274
Senior Member
Certified Car Nut
Originally Posted by J Wikoff
I see a PCV cover gasket. I found two in my stash.
http://www.bonnevilleclub.com/forum/...&highlight=pcv
04-15-2007, 12:13 AM
#275
Junior Member
Posts like a Ricer Type-R
Thread Starter
My full gasket kit from Fel-Pro has one. I also have different thicknesses of cork and neoprene to cut my own.
Fel-pro is paper, I'll probably laser-cut my own out of neoprene.
Fel-pro is paper, I'll probably laser-cut my own out of neoprene.
04-15-2007, 12:14 AM
#276
Senior Member
True Car Nut
Join Date: Mar 2005
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
That'* the little bastard alright. Wasn't he here when you were? He'* a big sucker now. Maine Coon breed.
Tomorrow starts the LIM and SC. FOR SURE. Depending on how my hand recovers from today'* work at FIE, I may get them done.
Tomorrow starts the LIM and SC. FOR SURE. Depending on how my hand recovers from today'* work at FIE, I may get them done.
04-15-2007, 10:03 AM
#278
Junior Member
Posts like a Ricer Type-R
Thread Starter
He was a stray. Dunno where he came from.
A bright sunny day today. Going to be tackling a little fiberglass work and the LIM after Katie goes to grandma'*!
A bright sunny day today. Going to be tackling a little fiberglass work and the LIM after Katie goes to grandma'*!
04-15-2007, 12:56 PM
#279
Junior Member
Join Date: Aug 2005
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I own 3 maine coons. They're all huge, shed a ton, eat like horses and well...put out like horses as well. 
And forget a bath, unless you have a death wish.
anyways. bill, i forgot to ask in my last post, how the heck is that lifter valley so clean?
frequent oil changes or did you clean the block? I must have missed something?
And forget a bath, unless you have a death wish. anyways. bill, i forgot to ask in my last post, how the heck is that lifter valley so clean?
frequent oil changes or did you clean the block? I must have missed something?
