Pulley Problem?
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2006
Location: Whitman,MA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Pulley Problem?
hey i just recently put on my 3.4 intense pulley and when i punch it, it will hit 10 psi on the gauge but it feels like somethings wrong like it will run real rough and make a noise like its dying down then it will be fine..... any answers would be great.
#3
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
What other mods have ya done?
Intake?
Exhaust?
Cooler Plugs?
Good tune-up ?
It could be the knock sensors pulling timing on ya.
Intake?
Exhaust?
Cooler Plugs?
Good tune-up ?
It could be the knock sensors pulling timing on ya.
#4
DINOSAURUS BOOSTUS
Expert Gearhead
You could cruise to 06082 on Saturday and we could scan it up and check'r out. You look to be about a 2 hour drive.
As the guys above mentioned.. we need to know what else you did for other mods.
As the guys above mentioned.. we need to know what else you did for other mods.
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
1992-1999
1
10-05-2006 08:31 PM
dbtk2
Performance, Brainstorming & Tuning
13
08-27-2003 11:30 AM