Would this fit... Or an I nuts?
3800 Series III Supercharged Production Engine
This high output supercharged V-6 Crate Engine (RPO L32) features the following:
260 Horsepower @ 5400 RPM and 280 lb-ft @ 3600 RPM torque
Sequential fuel injection
Bore is 96.52 mm and Stroke is 86.36 mm with 8.5:1 compression ratio
Iron Block, Iron Heads and Hydraulic roller design camshaft
This engine powers the Buick Park Avenue and Regal, Pontiac Bonneville and Grand Prix, Chevrolet Monte Carlo, and Chevrolet Impala
This production engine includes: exhaust manifolds, intake manifold, supercharger, injectors, fuel rail, balancer, water pump and flywheel
Technical Notes: Pulley, belt, p/* pump, a/c pump, starter, alternator and engine cover are not included with this engine
Would this fit in my SLE and would I be crazy if I considered doing it?