What will fix this.
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Mar 2004
Location: Monroe Michigan
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
What will fix this.
Ok i have a hypertech thermorunner chip and a 2.2inch */C pulley right now on my 92 SSEI, everything else is stock. After i put the chip in there was a difference and no problems, now after the pulley it bogs down in 3rd gear, is that because of my restrictive exhaust and intake? Someone told me i should get bigger injectors, and if i do need to how much are they and where do i get them? Oh and the intake and exhaust should be done by mid next week.
#4
Junior Member
Posts like a Ricer Type-R
Lose the platinum, and go back to copper. At least one, possibly 2 heatranges colder.
Don't change injectors until you put a scantool on the car to verify that it'* running lean. With my mods, the stock injectors are keeping up fine.
Don't change injectors until you put a scantool on the car to verify that it'* running lean. With my mods, the stock injectors are keeping up fine.
Thread
Thread Starter
Forum
Replies
Last Post
ajgullery
1992-1999
12
02-26-2007 02:00 PM