Make it Whine
#4
Before dropping pulley sizes you MUST scan for KR and fuel pressure. Your exhasut manifolds, being a series 1 motor, likely have some cracks too. Take care of that before adding boost, but you should be fine to do the intake. Throw on a 180* thermostat while you're at it too
#5
Junior Member
Posts like a Ricer Type-R
All Series 1 (91-95 Supercharged) owners should read the top article on this page before even thinking about a smaller pulley:
http://www.bonnevilleclub.com/forum/...ode=cat&cat=20
http://www.bonnevilleclub.com/forum/...ode=cat&cat=20
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: North Texas
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
I just checked out Intense site and was wondering what intake i need or if i should just get a replacement drop-in filter and where would i get scanned for KR??
#7
Senior Member
Certified GM nut
Join Date: Mar 2007
Location: Yuma, AZ.
Posts: 1,937
Likes: 0
Received 0 Likes
on
0 Posts
Intense does not sell a direct fit for your 95. If you go with a replacement drop-in filter K&N is the way to go. If you want the whine or you plan on doing more to your car, it is better that you get the Fender well intake.
#9
Correct me if I'm wrong, but I believe it'd be this one:
http://www.intense-racing.com/Mercha...oduct_Count=10
I made mine using their basic parts, but simply connected the tube straigt to the TB, extended the IAT myself to mount in the filter, and made my own filter-tube connector.
http://www.intense-racing.com/Mercha...oduct_Count=10
I made mine using their basic parts, but simply connected the tube straigt to the TB, extended the IAT myself to mount in the filter, and made my own filter-tube connector.
#10
Junior Member
Posts like a Ricer Type-R
There isn't one for the S1. You have to mix/match. I suggest you special order it with 6" extra tubing to make sure you have enough, then relocate your Evap canister. If you have the double washer bottle for the headlight sprayers, you'll need to get a single bottle out of a car that doesn't.
I simply swapped the washer reserviors between my two cars.
I simply swapped the washer reserviors between my two cars.