air intake
#1
air intake
i'm looking to put a cold air intake on my 2000 bonnie but i want to keep the stock air box so is there a way i can gut the air box.......put a k&N cone filter in there and run a pipe from the intake part of the box trough the car to get colder air.....also can some one post gutting pick like to see the before and after of there air boxs ????
#2
Senior Member
Posts like a Corvette
Join Date: Feb 2009
Location: Jersey Shore
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
doing that you would see the same gains as gutting the air box and dropping in a K/N panel filter. Trying to shove a cone filter is not worth it
#3
-- SITE DONATOR --
True Car Nut
I would look into getting a true cold air intake instead of messing around with the air box.
JMB Performance & Powdercoat, LLC
This is what I have in my car, it can be customized for color, and whether or not you have solid motor mounts. Looks great, install was fairly easy, worth the money.
JMB Performance & Powdercoat, LLC
This is what I have in my car, it can be customized for color, and whether or not you have solid motor mounts. Looks great, install was fairly easy, worth the money.
#4
Senior Member
Posts like a Northstar
Join Date: Apr 2009
Location: Indianapolis, Indiana
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
I dont have pics but i do have a 2000 SSEi. the airbox doesn't have very pronounced baffles inside like the older model air boxes. So basically what you do is grab your dremmel and cut oout anything thats restrictive. it'll feel wrong because the "baffles" are molded all nicely into the airbox (lol) but sometimes thats what you gotta do for performance sake. Plus with the dremmel you can clean it up pretty nicely to where it looks almost if not completely factory, depending on your skill with the dremmel. I would advise that when you finish make sure there are no looses pieces of plastic or shavings left in the airbox. Your tb screen will stop the little stuff but you don't want large pieces blowin around in there.
Thread
Thread Starter
Forum
Replies
Last Post
markviiisvt4
Performance, Brainstorming & Tuning
10
01-03-2006 11:46 AM
bmsgaffer86
Performance, Brainstorming & Tuning
18
06-07-2004 01:26 AM
pakenney38
Performance, Brainstorming & Tuning
29
03-06-2004 01:40 PM