Spark Plugs
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2006
Location: Buckeye, AZ
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Spark Plugs
I purchased the intense pkg 1. I have everything installed except for the pulley and spark plugs. If I install the spark plugs first is it going to make the car act like it'* misfiring? THanks
#5
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2006
Location: Buckeye, AZ
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Well, now I have already swapped out the plugs and the car is fine until the boost meter gets close to 0. I had intentions of doing them at the same time, but I had something I had to go do and had to drive it. Do I have a bad plug, or would this be normal?
#7
Senior Member
True Car Nut
Originally Posted by SSEi-Ei-O
Well, now I have already swapped out the plugs and the car is fine until the boost meter gets close to 0. I had intentions of doing them at the same time, but I had something I had to go do and had to drive it. Do I have a bad plug, or would this be normal?
#10
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2006
Location: Buckeye, AZ
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
ok, so I put the pulley on today. Still had the misfire, took it to autozone to read the CEL. Misfire #5, Put in another Autolite 605. Operated much better, but not perfect. Once you get arourd 5psi the motor goes nuts with misfiring. So I took it to Advanced autoparts (because autozone can't clear cel codes). Cleared to code and went for a drive to get the light to come back on to see what the problem was, came back "Random Cylinder Misfire" ??? Any suggestions?