performance parts for 95 ssei
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: tampa fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
performance parts for 95 ssei
alright im new to this site and im new to this car i jus got it a week ago and i already had to replace the supercharger. i got the supercharger for 60$ at the junk yard. ne ways i was looking around for parts and the only thing i have found are pulleyboys pulleys. i plan on gettin the 2.5 pulley but im not sure if i want to yet i want to find more things befor i do that and i need help :?:
#2
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Winnipeg, Manitoba, Canada
Posts: 1,445
Likes: 0
Received 0 Likes
on
0 Posts
There are alot of things you need to consider before a pulley drop.
Read up here...it should have everything you need to know.
http://www.bonnevilleclub.com/forum/...=article&k=104
Read up here...it should have everything you need to know.
http://www.bonnevilleclub.com/forum/...=article&k=104
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: tampa fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
ok i did plugs and wires im waiting to do my maf sensor but evrything else i havent done do u know any web sites with performance parts i know its gonna take time but i want to do it right. i have intake and exhaust so i want to go to the fuel portion of it bigger injectors fuel pump ect.
#5
Junior Member
Posts like a Ricer Type-R
Bigger injectors? Why?
There'* no more power in bigger fuel injectors unless you're outflowing them to begin with, and you have a LONG way to go before then. Same goes for the fuel pump. It can support 400hp. What'* your fuel pressure?
How about you tell us what you want the car to do, and what your budget is. It'll give us something to work with.
There'* no more power in bigger fuel injectors unless you're outflowing them to begin with, and you have a LONG way to go before then. Same goes for the fuel pump. It can support 400hp. What'* your fuel pressure?
How about you tell us what you want the car to do, and what your budget is. It'll give us something to work with.
#6
Junior Member
Posts like a Ricer Type-R
Originally Posted by TampaSSEi95
1 more question how would i hook up an air/fuel ratio gauge on it
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: tampa fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
i want to get to around 300hp and my budget is a lil low its gonna take time ill prob be able to get something for it once evry two weeks maybe more depending on how much it costs
#8
Well, I hate to burst your bubble, but your chances are slim at reaching 300hp (crank or wheel?). Unless you plan to spend $1500+ on it, and that price doesn't even include a mandatory trans rebuild with a shift kit and hard internal parts. Other than that, the trans will be toast, as it cannot handle gobs of low end power in stock form.
Also you need to start small, such as a full tune up, the car needs to be in perfect running condition before even considering mods. The exhaust manifolds on these are known to be some of the freest flowing manifolds GM ever made, but they do have a downfall, they like to crack due to age. These and many other things are what you have to start with before considering modifications.
Also you need to start small, such as a full tune up, the car needs to be in perfect running condition before even considering mods. The exhaust manifolds on these are known to be some of the freest flowing manifolds GM ever made, but they do have a downfall, they like to crack due to age. These and many other things are what you have to start with before considering modifications.
#9
Originally Posted by TampaSSEi95
i want to get to around 300hp and my budget is a lil low its gonna take time ill prob be able to get something for it once evry two weeks maybe more depending on how much it costs
#10
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: tampa fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
hey thats why i wanted some good sites i know im not gonna be able to do it all at once i wish i could but its gonna b one step at a time and if i have the sites i can get a picture in my head on what i can do like i said i went to some of these sites on the tech info and i found nada but the pulleys