Header Coating
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
Header Coating
I've already started the tear down on my engine, and although I am nowhere near finished even the disassembly, I am already thinking about the headers. I was thinking of header wrap.. but that stuff us UGLY. I am sure it performs good.. but I will sacrifice a few hp if that wretchedness stays out from under my hood. Straitor said header coating is $200.. I don't know about you, but that is too much for me. As I was thinking, I remember seeing 1800*F paint in JCW.. now, can I use this paint to help keep heat in by any chance? It intruiges me.. I may get it, just because it would make my headers pretty.. but if it has function to it.. I may want it all the more badly
-justin
-justin
#2
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Header wrap preforms better than ceramic coating. But it locks moisture in and over time destroys headers. BUT is you coat the header wrap w/ some sort of specific sealer type paint then it won't destroy the headers. The high temp paint isn't gonna do much if anything at all.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 0 Likes
on
0 Posts
Damn, that sucks. Not worth destroying my headers for a couple ponies. I gess now my other question is can I remove the factory installed heat sheilds, and just paint my headers? I don't know how much the sheilds actually cool, but if they aren't significant.. would it be wise to just ditch them?
-justin
-justin
#4
Senior Member
Certified GM nut
Join Date: Jun 2004
Location: Grand Haven, Michigan
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
I don't think that it would be worth your while to actually take everything out just to paint them and gain a few ponies tops. It might be something to look at if your going to tear it down reguardless.
#7
Senior Member
Posts like a Camaro
Join Date: Jul 2004
Location: Manassas, Virginia NOVA
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Whats with the warning on European cars for that paint? And how are you so car knowledgable at only 14? Im barely learning how to change my oil tomorrow! lol
#8
Senior Member
Posts like a Turbo
Join Date: Aug 2003
Location: Ashland, Ohio
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
if you heat paint the manifolds, then heat wrap em, and paint em with the sealer you should be good to go
i dont see why heat paintin the manifolds would hurt, but if your not gonna heat wrap em, dont remove the factory heat shields
i dont see why heat paintin the manifolds would hurt, but if your not gonna heat wrap em, dont remove the factory heat shields
#9
Senior Member
Posts like a Turbo
Join Date: Sep 2004
Location: Canton, Ga
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Eastwood has a good aluminized header paint that I've used a few times.
I've used it for looks mostly in the past. It is supposed to have heat dispersal properties though. It lasted about 4 years on a show car with tri y headers. Be SURE they are clean before you paint though. Even a fingerprint will cause the hightemp paint to lift after it bakes on.
Try
http://www.eastwood.com/shopping/pro...manifold+paint
JLathem
I've used it for looks mostly in the past. It is supposed to have heat dispersal properties though. It lasted about 4 years on a show car with tri y headers. Be SURE they are clean before you paint though. Even a fingerprint will cause the hightemp paint to lift after it bakes on.
Try
http://www.eastwood.com/shopping/pro...manifold+paint
JLathem
Thread
Thread Starter
Forum
Replies
Last Post