Where to cut?
#2
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
on your first pic, where ever you see a plastic rivet, drill or cut off. Whatever falls out, throw away. reinstall shell
#4
Senior Member
Posts like a Supercharger
Join Date: Mar 2006
Location: Chicago
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
No, you need the part in the 4th picture, It holds the other side of the air filter in the box. If you want to, you could try cutting that oval out all the way to a rectangle and, if you're so inclined, you could cut the side where your fingers are in the 4th picture.
You'll end up up with the front and side cut out, with a lot off room for air to enter. Just make sure to only cut where the little fillet things are, because if you cut all the way to the edge, if won't seal against your filter anymore.
You'll end up up with the front and side cut out, with a lot off room for air to enter. Just make sure to only cut where the little fillet things are, because if you cut all the way to the edge, if won't seal against your filter anymore.
Thread
Thread Starter
Forum
Replies
Last Post
BonneAlien
Your Ride: GM Pictures & Videos
13
04-22-2004 07:25 PM