Want to know how to upgrade cheap, (first things, easiest)
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Want to know how to upgrade cheap, (first things, easiest)
I've read about a 180 stat and more about intakes and stuff. but i just want to know the first things to do and the cheapest, Im probably getting an intake soon, then converting to CAI but other than that i want to know prices. Lik e how much is a 180 stat, or a tranny cooler and, reccomendations for spark plugs and wires. and/ or exhaust
Thanks
Thanks
#2
Senior Member
Certified Car Nut
180 should be no more then 10 for the stat, and a few bucks for the gasket. I built my pipe and filter setup for $100, but i'm not on the box yet. Tranny cooler anywhere from 40-60 easy? Wires around $50 for a good set of Taylors or MSD. Plugs are a couple bux a piece x6, exhaust expect around $130 for one of the big 3.
#4
Senior Member
Expert Gearhead
Best "mod" hands down is a FULL blown tune up, nothing will be that, one your car is tip top shape, then..and only then start your modding.
Bill is bang on, TECHINFO is for you
Bill is bang on, TECHINFO is for you
#8
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Thanks a ton guys, i live in grand haven michigan, if you know where it is.
Can i get most of that stuff at autozone, and i can do the tune up but dont have the time,
could i get a list of what the best things for a "FULL" tuneup would entail.
Lastly, i dont know how to install the 180 stat, maybe a little walkthrough, either post or email,
THANKS
Can i get most of that stuff at autozone, and i can do the tune up but dont have the time,
could i get a list of what the best things for a "FULL" tuneup would entail.
Lastly, i dont know how to install the 180 stat, maybe a little walkthrough, either post or email,
THANKS
Thread
Thread Starter
Forum
Replies
Last Post