stock M62 times
04-18-2005, 11:53 AM
#21
Senior Member
Certified Car Nut
Re: stock M62 times
Bill...
What'* the M62 engine run (in a bonne) in the 1/4 STOCK?
with a 2.2 pulley?
Just curious on this and if it'll be worth my project.
Thanks in advance!
2.2 will probably get you around 15.00 with supporting mods.
Originally Posted by BonnedGP
What'* the M62 engine run (in a bonne) in the 1/4 STOCK?
with a 2.2 pulley?
Just curious on this and if it'll be worth my project.
Thanks in advance!
04-18-2005, 02:17 PM
#22
Junior Member
Posts like a Ricer Type-R
Originally Posted by willwren
Originally Posted by BonneMeMN
High 14'* in a Series 1 L67 is a little too optimistic IMO.... I'd expect 15.5 with a good driver/launch, in 100% stock form.
04-18-2005, 08:39 PM
#23
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Apr 2005
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
You know, i never even thought to ask what bonne'* weigh. I'm sure it'* a bit heavier than my coupe GP...although it is still heavy. But the bonne'* probably still have a couple hundred on me.
So you think the M62 in my GP with the 2.2" pulley and a real good tune-up can run a border 15?
So you think the M62 in my GP with the 2.2" pulley and a real good tune-up can run a border 15?
04-18-2005, 08:53 PM
#25
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Apr 2005
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Oh ****, didn't know they were THAT heavy! My GP'* curb weight is approx 3200 without me in it...and i'm an additional 220. So damn, maybe i can get high 14s with a nice tuneup and small pulley 
04-18-2005, 09:09 PM
#26
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Apr 2005
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
also...i eventually plan on cam'n it for higher RPM pull. So far it looks like these engines are good for mid/low end, which is cool for a jump, but i don't want to hang in first gear for 10 seconds like this damned 3.1 does. It'* got very good mid/low, fair mid, and absolutely no high.
Thread
Thread Starter
Forum
Replies
Last Post