Intense 1X cam w/ 1.9 Rockers?
#2
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
No.
Most aftermarket heads are clearanced for .600 lift. Stock heads are clearanced for about .524-.526
Stage 1X N/A cam has a .327 lobe lift.
lobe lift x rocker ratio = valve lift
.327 x 1.9 = .621
Most aftermarket heads are clearanced for .600 lift. Stock heads are clearanced for about .524-.526
Stage 1X N/A cam has a .327 lobe lift.
lobe lift x rocker ratio = valve lift
.327 x 1.9 = .621
#3
Senior Member
Posts like a Turbo
Join Date: Dec 2006
Location: NHRA Division 3
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Cant be done....................
But on another note. you can get the 1.9s and get a cam made so that you stay at .525ish lift.
Its a simlar trick that we do with our COMP ELIM. engines. It accelerates tha valve open faster
But on another note. you can get the 1.9s and get a cam made so that you stay at .525ish lift.
Its a simlar trick that we do with our COMP ELIM. engines. It accelerates tha valve open faster
#5
Senior Member
Posts like a Turbo
Join Date: Sep 2005
Location: Puerto Rico
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
you could do a S1x and 1.8 Rockers BUT youd need Stage 3 heads......(Todd Runs this setup)
#6
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by alexcoqui
you could do a S1x and 1.8 Rockers BUT youd need Stage 3 heads......(Todd Runs this setup)
What kind of #'* is this setup capable of? Im talking HP & 1/4 mile.
You can click my mod list for details.
#8
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by alexcoqui
But wait, we are talking about NA? right?
The lifts are the same either way. Nobody has done this witih an N/A setup yet.
#10
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2006
Location: Granville, Ohio ~NEBF '07 Survivor~
Posts: 5,001
Likes: 0
Received 0 Likes
on
0 Posts
Just in general... doesn't have to be NA or Boosted...
So, would it be beneficial to run a custom grind cam with 1.9s as opposed to a stage 3 cam?
So, would it be beneficial to run a custom grind cam with 1.9s as opposed to a stage 3 cam?