SS M90 Swap
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
SS M90 Swap
I am going to be doing an SS M90 SC swap soon, it was used on a friend of mines buick regal until it was totalled so I have all the parts, anything weird I might find putting it on the bonni?
#3
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
It is from a 97 GP I'm pretty sure, it has the connection for the brake booster, then 2 others, 1 is used for the boost bypass valve and the other was for a vacuum line that went to the climate control, I think I can just block off the other connector beacuse there is a seperate tree with 2 connectors that you just run a piece of line to each
#4
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
also what bin should I use from a stock SC car? I know I have to pull out some timing per the ZZP instructions, and put my tranny settings into the new bin, anything else?
#8
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
Well I will use a SSEi bin then make the changes that ZZP calls for, like taking 8 degrees of timing out throught the tables, and AE fuel ratio, and PE I think, its all in the directions, then put my MAF and trans tables in from my bin since I will use the same TB and trans
Thread
Thread Starter
Forum
Replies
Last Post
SPEED ADICTIONS
Performance, Brainstorming & Tuning
3
05-05-2008 09:52 PM