What do you guys think about these I found
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Oct 2007
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
What do you guys think about these I found
I was just looking for some inexpensive mods to do for now.
This intake from ebay has a k+n filter and in very cheap thought I'd ask. I would also build a barrier for it. There were some other nice AEM and K+N intake systems but none specifically for a bonneville.
http://cgi.ebay.com/ebaymotors/95-96...spagenameZWDVW
This is a link I found through another forum Just thought I'd ask some opinions. I read the "what it is" link and seems prety legit to gain 15-20 hp. Can't afford *.C. or turbo for a while.
http://www.turbonator.com/index.html?id=MSNPowerPontiac
Thanks for looking
This intake from ebay has a k+n filter and in very cheap thought I'd ask. I would also build a barrier for it. There were some other nice AEM and K+N intake systems but none specifically for a bonneville.
http://cgi.ebay.com/ebaymotors/95-96...spagenameZWDVW
This is a link I found through another forum Just thought I'd ask some opinions. I read the "what it is" link and seems prety legit to gain 15-20 hp. Can't afford *.C. or turbo for a while.
http://www.turbonator.com/index.html?id=MSNPowerPontiac
Thanks for looking
#4
Senior Member
Posts like a Northstar
Join Date: Mar 2007
Location: Minneapolis, MN
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
It seems hard to believe they can sell that setup with a genuine K&N filter for that price. A genuine K&N filter of that type would cost that much by itself. Ask the seller if the coupler is rubber or silicone. Silicone is preferred. Also, is there an opening in either the filter or the tube for your IAC? Other than that, I can't comment on the quality of the set-up except to say he is ripping you on the shipping cost. Others will certainly chime in.
#5
Junior Member
Posts like a Ricer Type-R
You mean IAT, not IAC. Most members here who buy intakes have to drill that hole and use a rubber grommet. You will have a hard time finding an online pipe that has the hole, or if it does, it'* rarely the right size.
If it really comes with a filter, it looks like a good deal in spite of the inflated shipping costs. But it won't gain you what it COULD until you fully shield it from engine bay heat.
The turbonator will be a restriction in your intake.
If it really comes with a filter, it looks like a good deal in spite of the inflated shipping costs. But it won't gain you what it COULD until you fully shield it from engine bay heat.
The turbonator will be a restriction in your intake.
#6
Senior Member
Posts like a Camaro
Join Date: Jan 2003
Location: Jenison, MI (Near Grand Rapids)
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
The bend on the aluminum pipe looks a little tighter than ideal, and the filter isn't the "filter of choice", but aside from that, it looks alright.
And, what everyone else said about the turbonator.
And, what everyone else said about the turbonator.
Thread
Thread Starter
Forum
Replies
Last Post
nickycarts
Detailing & Appearance
14
08-12-2008 05:11 PM
bmsgaffer86
General GM Chat
18
02-23-2005 10:07 AM
Paulnold
Performance, Brainstorming & Tuning
10
03-28-2003 02:16 PM