Stainless Air Intake
06-10-2003, 10:22 PM
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Aug 2002
Location: Holley, NY
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Stainless Air Intake
Hey guys....
Got tired of looking for a good (low priced) CAI tube... so I had this one made for me. I am going to make another 10 if there is interest. Price would be $100. It'* made from 302 Stainless 3.5" x .062 wall tubing mandrel bent and I polish it.
Take a look at the links. Hole placement for the IAT is about half way to the filter. You supply thr Filter. It uses the K&N #RU-3130 and costs about $30
So... Any interest???
Salmanman
Got tired of looking for a good (low priced) CAI tube... so I had this one made for me. I am going to make another 10 if there is interest. Price would be $100. It'* made from 302 Stainless 3.5" x .062 wall tubing mandrel bent and I polish it.
Take a look at the links. Hole placement for the IAT is about half way to the filter. You supply thr Filter. It uses the K&N #RU-3130 and costs about $30
So... Any interest???
Salmanman
06-10-2003, 10:54 PM
#3
Senior Member
True Car Nut
Join Date: Feb 2003
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like what I did. For a little more glammer send each tube to http://performancecoatings.com/ They can put a nice finish on there and really make it look professional. I got a Cermachrome finish, cost a little over 20 US dollars.
06-11-2003, 01:19 AM
#5
Senior Member
Posts like a Turbo
Join Date: Feb 2003
Location: Michigan
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by smellbird
Sounds like what I did. For a little more glammer send each tube to http://performancecoatings.com/ They can put a nice finish on there and really make it look professional. I got a Cermachrome finish, cost a little over 20 US dollars.
06-11-2003, 01:54 AM
#7
Guest
Posts: n/a
very nice job on the cover, i did mine like that too. also, i have a stainless intake tube too. but stainless looks great, but it does retain alot of heat, i wrapped mine with a reflective insulation and dropped my intake charge by over 40*. under the hood, it does get hot, and stainless has a hard time of disapating the heat, it just absorbs it.
but still , they are well worth it.
but still , they are well worth it.
06-11-2003, 03:59 PM
#9
Senior Member
True Car Nut
Join Date: Feb 2003
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
"Cermachrome (*ūrm - a - krōme) Ceramic Exhaust Coating is the most popular kind of coating on the market today. This type of coating (metallic ceramic) is used by more companies and manufacturers than any other material. It is extremely popular on exhaust systems, where the high luster finish provides a very attractive, durable surface. The high temperature characteristics of ceramics have been combined with metallic frits to create a coating that can withstand metal temperatures in excess of 1300° F and provides 5000 hr. salt spray protection.
A truly unique coating that is based on a water/solvent system, it may be applied to a variety of surfaces and metals such as exhaust system components, brackets, valve covers, hinges, grills, suspension parts or any metal part that can withstand the 500° F cure temperatures. It polishes to a high luster, stainless/chrome appearance that will not rust, and is especially effective as a hard protective coating for aluminum parts."
That'* taken right from their site. They also have other coatings in which you can have a color coating.
A truly unique coating that is based on a water/solvent system, it may be applied to a variety of surfaces and metals such as exhaust system components, brackets, valve covers, hinges, grills, suspension parts or any metal part that can withstand the 500° F cure temperatures. It polishes to a high luster, stainless/chrome appearance that will not rust, and is especially effective as a hard protective coating for aluminum parts."
That'* taken right from their site. They also have other coatings in which you can have a color coating.
