New exhaust installed...
12-31-2002, 05:09 PM
#1
Junior Member
Thread Starter
Join Date: May 2002
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New exhaust installed...
After living with a blown cat and loose down pipe for 6 months I finally got my new exhaust installed. I am running 3" stainless steel all the way with mandrial bends. Both the cat and resonator have been removed. I am using a Magnaflow muffler off of a V8 Camaro with twin dual rolled chromed square tips. I went with the 3" because I have plans to install a CAI and a 2.25 - 2.4 */c pulley in the real near fuure. I wanted to make sure I had plenty of CFM flow thru ther system.
Here are some pics:
and here is an audio clip (39 sec, right click and save):
http://www.users.qwest.net/~jacquesgordon/mixdown.mp3
Here are some pics:
and here is an audio clip (39 sec, right click and save):
http://www.users.qwest.net/~jacquesgordon/mixdown.mp3
12-31-2002, 06:45 PM
#4
Junior Member
Thread Starter
Join Date: May 2002
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
that sounds awesome. Gord, give us the cost breakdown on that.
This was entirey a custom install. The pipe was also rerouted to avoid uneccissary bends (I think about 3 were removed). I don't have a parts specific breakdown but here goes:
Parts were $669.99
Tips were about $47 a piece, 15+ feet of 3" stainless steel @ $13 - $18 per foot, Chromed muffler around $130 (no cat or resenator purched
)Labor was $480
Total was $1179.99
But it was worth every penny.
12-31-2002, 06:53 PM
#5
Senior Member
Posts like a 4 Banger
Join Date: Nov 2002
Location: Chicago, Illinois
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
wow, sounds awesome. that'* a crap load of money for that sound. u said that your not running a cat or resonator? i like it a lot, and i'm jeolous 
i want one really bad. nice job
i want one really bad. nice job
01-01-2003, 03:23 AM
#7
Junior Member
Thread Starter
Join Date: May 2002
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jeffrey10x2
sounds fantastic. im going to do exhaust on my ssei in feb, did you run 2 1/2" outlets? and where did you get the tips sooo cheap. sumit wants 125 each for borla tips like that.
They got them thru trhe same vendor that provided the rest of the parts. I believe it is 3" inlets and 2.25" outlets, but I am not positive. It is whatever came with the muffler.
01-02-2003, 03:29 AM
#9
Senior Member
Posts like a Turbo
Join Date: Sep 2002
Location: B.C. , Canada
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
NICE LOOK BUT WOW ON PRICE , went custom also but cost was only 250 CDN, 2.75in stainless.into Flowmaster Series 40 into ractive stainless tips, then again it ummmm helps of your friend owns the muffler shop 
