Finally installed my 3.5 PB pulley and Dp 200 amp alt.
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Nov 2002
Location: Ottawa,Can
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Finally installed my 3.5 PB pulley and Dp 200 amp alt.
Ive been staring at the pulley for months and finally decided to get the puller and do the job.What a difference,when i put the chromies on i lost quite a bit of performance but after the pulley swap i got that performance back and then some ,I went and orderded the 3.3 pulley as well for future modding,for those who havent done this mod ,please take my word for it ,get it done asap , I also installed my 200 amp powder coated red Domestic Performance alternator aand man is she perty,(Thanks Ty).My digital capacitor was reading low 12'* at idle and now she reads in the high 14'*,I have yet to install my 2 guage wire and 450/4 amp :?,I'll try and get some pics up tomorrow.
#3
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Nov 2002
Location: Ottawa,Can
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by macho_mike21
the chromes made that much of a difference? Do you think you have any KR?
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Good Job, with an intake and headers you should be able to run with the 3.3". You have the plugs thats good, did you swap out to 180* thermostat? the cooler temps will help with kr.
#8
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Sweet! Bet your wondering why you waited so long.
Question about the DP Alt, did it come powder coated or did you take it somewhere? What did it run you? I'm getting curious on an Alt for me, wonder if the 96-99 will fit my 01 ssei.
BOOST ON!!!!!
Question about the DP Alt, did it come powder coated or did you take it somewhere? What did it run you? I'm getting curious on an Alt for me, wonder if the 96-99 will fit my 01 ssei.
BOOST ON!!!!!
#9
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Nov 2002
Location: Ottawa,Can
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PontiacDad
Good Job, with an intake and headers you should be able to run with the 3.3". You have the plugs thats good, did you swap out to 180* thermostat? the cooler temps will help with kr.
#10
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Nov 2002
Location: Ottawa,Can
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TaylorD
Sweet! Bet your wondering why you waited so long.
Question about the DP Alt, did it come powder coated or did you take it somewhere? What did it run you? I'm getting curious on an Alt for me, wonder if the 96-99 will fit my 01 ssei.
BOOST ON!!!!!
Question about the DP Alt, did it come powder coated or did you take it somewhere? What did it run you? I'm getting curious on an Alt for me, wonder if the 96-99 will fit my 01 ssei.
BOOST ON!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
excessive81
Audio (and aftermarket electronics)
12
09-17-2005 02:43 PM