Unscrew metal ring from TB/Intake...Pry black rubber tube off from TB/Intake, dont worry, they are pretty strong, use wd40 if u have to
If I remember right, there are four black screws holding the air box to the car. The first two are near the front of the car, you have to pry the screws up from underneath while screwing them out at the same time.
The other two are near the bottom of the air box, you should remove the black rubber tube before reaching those.
The IAT sensor, just pull that out of the tubing, it is in there pretty snug, so get mad at it and yank, once again, maybe use some type of lubricant.