Help with mod
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2006
Location: Gloversville N.Y
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Help with mod
I would like help some mods if possible what I've done so far K&N cone filter mass airflow screen removed, autolites racing606"* ,cleaned and polished TB chip too brainwash the comp too read 35 degrees {dieode} anymore help would be great
It'* a 93 Bonneville SE I call Her Green Hornet
Thanks
Tracy34
It'* a 93 Bonneville SE I call Her Green Hornet
Thanks
Tracy34
#3
I don't think that "trick" you did with making the PCM think it'* 35* out will work for long at all. The computer will realize that the value can't be correct and will use info from other sensors to compensate.
Also, not sure if this would apply to your model year too, but this is from a 2000.
This was posted by Rogue in a thread on IAT Tricking:
I doubt you'll see any timing advance even if your car is OBD1
As far as other mods go... if not done already, you really need a heatshield to protect your intake from hot engine bay air. It couldn't be good to suck in 150* air and tell your computer it'* 35*.
You may want to consider getting a 180* thermostat also.
Also, not sure if this would apply to your model year too, but this is from a 2000.
This was posted by Rogue in a thread on IAT Tricking:
I doubt you'll see any timing advance even if your car is OBD1
As far as other mods go... if not done already, you really need a heatshield to protect your intake from hot engine bay air. It couldn't be good to suck in 150* air and tell your computer it'* 35*.
You may want to consider getting a 180* thermostat also.
#4
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
you realize that the PCM has already bypassed the Diode because of the other paramaters that it monitored.....
you have not tricked the PCM.....it has tricked you
you have not tricked the PCM.....it has tricked you
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Hi... glad to have you here. Here'* a link to the first steps and first mods. From there things can get as in depth as you'd like or stay as simple.
http://www.bonnevilleclub.com/forum/...e=article&k=91
BTW, a moderator may move this to the Performance and Brainstorming section to help you get better exposure on your performance minded question.
http://www.bonnevilleclub.com/forum/...e=article&k=91
BTW, a moderator may move this to the Performance and Brainstorming section to help you get better exposure on your performance minded question.
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2006
Location: Gloversville N.Y
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Thanks ForThe Info
Thank Guys For The Info I Thought The Diode Just A Joke On Ebay But For A Buck U Get What U Pay For Thanks Again For All The Help Gents And I Would Like Too Thank Bandit Again For Some Info
#7
DINOSAURUS BOOSTUS
Expert Gearhead
Tracy... Bandit'* a good guy.. please don't swell his head by thanking him too much though.
Have you already looked over the list of mods that we've found to work and decided on a couple?
Have you already looked over the list of mods that we've found to work and decided on a couple?
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2006
Location: Gloversville N.Y
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Yes I Have And Thanks For Everybodys Time. And Help Hope Nobodys Head Is Swelling
Too Much Too Get There Helmet On When They Go To The Dragstrip
Too Much Too Get There Helmet On When They Go To The Dragstrip
Thread
Thread Starter
Forum
Replies
Last Post