Performance, Brainstorming & Tuning Talk about modifications, or anything else associated with performance enhancements. Have a new idea for performance/reliability? Post it here. No idea is stupid! (please use Detailing and Appearance for cosmetic ideas)

Getting screw from bottom of airbox out

Thread Tools
 
Search this Thread
 
Old 09-05-2003, 02:19 PM
  #1  
Senior Member
Posts like a Northstar
Thread Starter
 
Glasuan's Avatar
 
Join Date: Aug 2003
Location: Buffalo Grove, IL
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts
Glasuan is on a distinguished road
Default Getting screw from bottom of airbox out

I am trying to get a screw from the bottom of the front airbox out. It is impossible to reach. Any tips would be great. It is the front one closer to the headlight, where the filter generally sits.
Old 09-05-2003, 08:09 PM
  #2  
Senior Member
Certified Car Nut
 
bonnie94ssei's Avatar
 
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes on 0 Posts
bonnie94ssei is on a distinguished road
Default

Mine'* a 94 but not sure if your box is similar in how it'* screwed in. But the one screw holding mine down on the bottom was a huge PITA to get out. I don't think I was able to do it without removing the accordian tube first.
Old 09-05-2003, 11:13 PM
  #3  
Senior Member
Posts like a Northstar
Thread Starter
 
Glasuan's Avatar
 
Join Date: Aug 2003
Location: Buffalo Grove, IL
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts
Glasuan is on a distinguished road
Default

Hmm, must be different then, my accordian tube is far away from the bottom screw. There is a little plastic overhang on the screw, which is what makes it hard to reach. I will probably just cut around it to give myself access.
Old 09-06-2003, 11:59 AM
  #4  
Senior Member
Posts like a Northstar
 
Jeep2Bonny's Avatar
 
Join Date: Mar 2003
Location: Fairhaven,Mass
Posts: 632
Likes: 0
Received 0 Likes on 0 Posts
Jeep2Bonny is on a distinguished road
Default

i don't remember having any screws except the 2 that were on thetop and all i had to do was undo the clamp.
Old 09-06-2003, 12:05 PM
  #5  
Senior Member
Posts like a Turbo
 
parallelcircuits's Avatar
 
Join Date: Apr 2003
Location: Arkansas
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
parallelcircuits is on a distinguished road
Default

Mine doesn't have a screw at the bottom. Take the accordian tube off and the back side of the airbox. Then the two front screws out and the bottom is just a little peice of metal stuck into some rubber. Just pull up on it and it slips right off.
Old 09-08-2003, 05:42 PM
  #6  
Senior Member
Posts like a Northstar
Thread Starter
 
Glasuan's Avatar
 
Join Date: Aug 2003
Location: Buffalo Grove, IL
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts
Glasuan is on a distinguished road
Default

Update: Well you guys were right, after the 2 screws at the top, the front part of the airbox simply slides out.
Old 09-09-2003, 12:45 AM
  #7  
Senior Member
Posts like a Corvette
 
CraZyDriVer868's Avatar
 
Join Date: Apr 2003
Location: Monticello, Minnesota
Posts: 1,520
Likes: 0
Received 0 Likes on 0 Posts
CraZyDriVer868 is on a distinguished road
Default

its all about hte triple extension....works like a charm...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
greenmoose92
1992-1999
5
02-12-2004 02:58 PM
Nytro67
1992-1999
13
08-29-2003 02:51 PM
Wolfedog50
Performance, Brainstorming & Tuning
3
05-08-2003 01:31 PM
vols1992
1992-1999
3
11-10-2002 10:45 AM



Quick Reply: Getting screw from bottom of airbox out



All times are GMT -4. The time now is 12:14 PM.