Rear Disc Brake Conversion for a 95 SSEI
08-16-2006, 01:31 PM
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Aug 2002
Location: Holley, NY
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Rear Disc Brake Conversion for a 95 SSEI
Has anyone done this conversion? can we use parts from the newer cars?
Salmanman
Salmanman
08-16-2006, 01:34 PM
#2
Senior Member
Certified Car Nut
No one'* attempted it yet.
Some suggestions if you even have the thought to try. Look at the C bodies rear brakes, they have the same setup up front, and it may be similar/exact out back, really need to get parts from H bad C bodies and measure/compare etc.
You'll also want the cyl from the car, so you have the appropriate proportioning for Front/Rear.
Some suggestions if you even have the thought to try. Look at the C bodies rear brakes, they have the same setup up front, and it may be similar/exact out back, really need to get parts from H bad C bodies and measure/compare etc.
You'll also want the cyl from the car, so you have the appropriate proportioning for Front/Rear.
05-03-2009, 01:30 PM
#3
Junior Member
Join Date: May 2009
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I have a 99 SSEi and I figured that the 2000 model rear disc parts would do the trick. So, I had a junk yard in Ohio send me a couple of rear suspension arms complete with brake hardware. I found out that GM changed the design as to the way the arms pivot. So, now I'm looking for some disc caliper mounting brackets. I read where some of the Caddy rear disc parts would fit, but haven't found the bracket I need so far.
Thread
Thread Starter
Forum
Replies
Last Post
pinball-koenig
Performance, Brainstorming & Tuning
20
09-14-2003 01:37 AM
