Ported Exhaust Headers
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Ported Exhaust Headers
Am I able to get some of these somewhere for a Bonne?
http://www.3800performance.com/Merch...roduct_Count=3
And would it be worth it with stock internals for now?
http://www.3800performance.com/Merch...roduct_Count=3
And would it be worth it with stock internals for now?
#3
Senior Member
True Car Nut
You can get those straight from Winterhalter for a little less money. www.winterhalterperformance.com
#4
Junior Member
Posts like a Ricer Type-R
Hold on a minute. Not necessarily true. There are differences between manifolds from year to year and MODEL TO MODEL. Make DAMN sure they'll fit before you buy them.
I posted some trivia some time ago about the sheer number of exhaust manifold part numbers from 92-99. Wanna know how many? I'll have to look it up We lost that post in the big crash a couple years back. Anyway it was something like 12 or 13 different part numbers from 92-99 ALONE.
I posted some trivia some time ago about the sheer number of exhaust manifold part numbers from 92-99. Wanna know how many? I'll have to look it up We lost that post in the big crash a couple years back. Anyway it was something like 12 or 13 different part numbers from 92-99 ALONE.
#6
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sol
Check your PM'* Twister. You don't need to spend 300 bucks or so on manifolds.
#8
Hey Bill. My PEM'* came off a SC'ed car(don't know which make) and they fit no problems.
WPI can port you a set, I've heard that he does very good work. Otherwise there are a bunch of guys over at CGP that also do it.
WPI can port you a set, I've heard that he does very good work. Otherwise there are a bunch of guys over at CGP that also do it.
#9
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
I have a WPI front mani and it'* of good quality.
The ports are nice and smooth and the black high temp coating that it came with is holding up stong for 4-5 months now.
And be ware of the diffrent rear manifolds, i found out the hard way that they are all not the same. The DP flange was different from the mani flange, and i've read stories about the location of the flange varying from right to left too.
I had to get a new DP and got ripped off.
It'* cool though, i'm getting headers this summer
The ports are nice and smooth and the black high temp coating that it came with is holding up stong for 4-5 months now.
And be ware of the diffrent rear manifolds, i found out the hard way that they are all not the same. The DP flange was different from the mani flange, and i've read stories about the location of the flange varying from right to left too.
I had to get a new DP and got ripped off.
It'* cool though, i'm getting headers this summer
#10
Junior Member
Posts like a Ricer Type-R
Originally Posted by 95naSTA
And be ware of the diffrent rear manifolds, i found out the hard way that they are all not the same. The DP flange was different from the mani flange, and i've read stories about the location of the flange varying from right to left too.