Possible suspension upgrade's?
#1
Senior Member
Posts like a Supercharger
Thread Starter
Possible suspension upgrade'*?
My bonnie rides nice right now, but it could be better of course.
So I was wondering other than doing a factory upgrade with the sse springs and stuff,
what else could I do to pep up the handling?
Is it possible to use suspension parts for later years like 92-99 or 00-05?
So I was wondering other than doing a factory upgrade with the sse springs and stuff,
what else could I do to pep up the handling?
Is it possible to use suspension parts for later years like 92-99 or 00-05?
#2
DINOSAURUS BOOSTUS
Expert Gearhead
On your 90, it'* very likely the 92-99 front sway will bolt right up. Not sure about the back. Other than that.. I can't think of much that can be swapped or even to swap if parts were available.
#4
Senior Member
Posts like a Supercharger
Thread Starter
I know I took my STB off a 92- something SSE. So the sway bars wouldent fit? I know theres a olds 88 at my junkyard that has FE3 suspension, I took the badge off it incase i dicided to use it lol
#6
Senior Member
True Car Nut
Join Date: Jun 2007
Location: New Lenox, IL
Posts: 2,478
Likes: 0
Received 0 Likes
on
0 Posts
Strut tower bars will also immensely improve handling, especially in conjunction with anti-sway bars. You can usually make these yourself. Most people have noticed a very big difference after installing one in the rear, which as I understand these cars don't come with.
#7
Senior Member
Posts like a Supercharger
Thread Starter
Strut tower bars will also immensely improve handling, especially in conjunction with anti-sway bars. You can usually make these yourself. Most people have noticed a very big difference after installing one in the rear, which as I understand these cars don't come with.
I noticed a big diff with the one in the front so I can only imagine how much one in the rear would help
#9
Senior Member
Posts like a 4 Banger
Join Date: May 2009
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
In case anyone comes back here. The front and rear sway bars will fit. The threaded holes are even there for rhe screws. The sprigs will interchange . You have to change the entire front strut though. I recently put SSEI frt struts and sway bars. I have the rear springs but they look exactly the same. The fronts made a big diff in ride quality. Firmer nicer ride than before. Used new stock rubber bushings. Thinking i should have pulled the rear air ride at the u-pull. Maybe i will. The front did come up a little and the Eighty Eight sits level now.
#10
Administratus Emeritus
Certified Car Nut
PURPLEXJ, I fixed your image code so it would show. You must use the Photobucket tags that start with [img] and end in [/img] for them to show on the Forum.