Electric Water Pump Install ????
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: Castle Rock , Colorado
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Electric Water Pump Install ????
I bought a Meziere Electric Water Pump to put on my 1996 ssei why I had the charger off (stock pump was leaking). I have everything back in place but I cant seem to find the correct belt and I cant seem to get the belt to not rub any way I put it on .... When your looking at the front of the engine, the upper motor mount, the arm that bolts under the power steering rubs the belt????
Anybody have pics of the routing for the stock belts or pictures of the belt routing after the pump install?????
Belt number???
Anybody have pics of the routing for the stock belts or pictures of the belt routing after the pump install?????
Belt number???
#2
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
You are going to need a belt 4" shorter with the EWP. The part # on a stock length Goodyear Gatorback belt is 4060940 and the belt you need carries the # 4060900 (Goodyear PN) and is 4" shorter.
Ed
Ed
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: Castle Rock , Colorado
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
That is the belt I have ..... How the hell do I route it??? I have everything installed but the lower sleeve on the Motor mount....
#5
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Step back and give it a little time. I've done my belt atleast 10 times but once i put it on all *** backwards and couldn't figure it out to save my life. 15 minutes later i figured it out.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
I believe you may have rubbing problems on the 96-99 era w/o pushing the power steering pump out away from the motor and swapping the accessory bracket. Although I have not yet tried to find out if it will fit, it appears that the lines are all off.
You drop from the tensioner to the crank instead of to the water pump.
You drop from the tensioner to the crank instead of to the water pump.
#7
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Belt routing goes, alt, a/c, h.b., tensioner, p.*., back to the alt. I probably have a 1/4 inch between the belt going from the h.b. to the tensioner and the p.*. pump.
I know I have the belt length I used on here somewhere. I'll try and find it.
Edit- I used a 910K6 size belt on my L36. But the L67 may have an additional tensioner near the the coil packs?
I know I have the belt length I used on here somewhere. I'll try and find it.
Edit- I used a 910K6 size belt on my L36. But the L67 may have an additional tensioner near the the coil packs?
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2007
Location: Castle Rock , Colorado
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
I believe you may have rubbing problems on the 96-99 era w/o pushing the power steering pump out away from the motor and swapping the accessory bracket. Although I have not yet tried to find out if it will fit, it appears that the lines are all off.
You drop from the tensioner to the crank instead of to the water pump.
You drop from the tensioner to the crank instead of to the water pump.
Accessory bracket??? Swap with what??
Thread
Thread Starter
Forum
Replies
Last Post
cjpenny89
1992-1999
3
09-13-2006 11:15 AM