3" exhaust = POWER!!
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2004
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
3" exhaust = POWER!!
Hey everyone!! Just got the car off the chasis dyno......
With 3.4 pulley, car made 221HP and 281ft/lbs
After installing 1.9 rockers and a custome 3" exhaust,
244HP and 327 ft/lbs torque!! Thats 23 WHP and an amazing 46 ft/ lbs at the wheels!! Great numbers!!
With 3.4 pulley, car made 221HP and 281ft/lbs
After installing 1.9 rockers and a custome 3" exhaust,
244HP and 327 ft/lbs torque!! Thats 23 WHP and an amazing 46 ft/ lbs at the wheels!! Great numbers!!
#6
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2004
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
There was a slight method to my madness......Before anything, when I first got the car dyno'd, just for *&G'*, we dropped the exhaust and ran it to see what would happen. With no exhaust on it at all, and before the rockers, it pulled 237 and like 297. This is without any restriction. Adding a restriction would decrease power. People say you hurt low end torque with big pipes, on N/A motors I agree, with any forced induction over 10 lbs of boost, I disagree.
#7
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bonney Lake/Ellensburg, Washington- WCBF '04, '05, '06, '07 Survivor-
Posts: 7,099
Likes: 0
Received 0 Likes
on
0 Posts
quick question. If you are putting these mods on your 2002 SSEi you should run stock at 240hp. :?