pics at the track when my egr blew open
#21
Senior Member
Posts like a 4 Banger
Join Date: Mar 2003
Location: Shelby Township, Michigan, U.S.A.
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
The constant battle against KR, I am way too familar with that subject.
Very nice numbers btw, I'm only running in the high 9'* in the 1/8. 14'* are in that thing for sure!
Very nice numbers btw, I'm only running in the high 9'* in the 1/8. 14'* are in that thing for sure!
#22
Guest
Posts: n/a
i talked to intense and zzp and both tell me that the 1.9 rockers are for the series 2 only. right now im doing some research on trying other roller rocker arms and seeing if they will work. the only problem i have seen so far in the rockers that im looking into is the clearance with the valve cover. the rockers that im looking into are the ford 5.0 pedestal mount rockers, they also come in 1.7 ratio. CRANE cams sells a set of alum roller rockers in 1.7 pedestal mount for like 200 bux. im also trying to get someone to fab a set of alum valve covers for our cars. from my checking, series 1 and series 2 valve covers are the same, im going to be replacing my rockers this week with a set of 93 roller fulcrum rockers and small block chevy valve springs, i have a friend that is bigtime into fords and he is getting me a pedestal mount ford rocker arm so i can check this out when i do it. i will post as soon as i do this. series 1 owners are basiclly on their own when it comes to mods. we have to do the R&D
#23
Senior Member
Posts like a 4 Banger
Join Date: Mar 2003
Location: Shelby Township, Michigan, U.S.A.
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
It sure sucks when you're one of the few doesn't it? I can relate. I was in the same boat back in 1998 with my '97 GTP back before the Series II mods got big.
Thread
Thread Starter
Forum
Replies
Last Post