and advance auto parts now has them

should i install a 180 stat. and what about the cooling fans. dont they come on at like 200 so how will that effect the operation with a 180 stat?

well low comes on a little over 200... then high speed (the only one that does anything) comes on at like 220 something...


so yes, a High Speed fan over ride would help heat and a 180* stat is good also.
im not sure on how to do the high speed fan over ride on your car but i bet its not much diffrent then a bonnie.

Just find the ground Turn on wire that goes to the high speed fan relay under the hood and put a switch to it to ground it when ever you want...

Riv, can you please edit your profile and add your year and model to your signature?

ok sure will. sorry if i am a pain in the b***

You're not a pain in the butt yet.


You will be after you start modding the car though.

arnt we all?

what cam or rockers would be best to install on my riv. after i get my scanner and scan for KR then remove any that i have. i have seen some on
http://www.seriesoneperformance.com/valvetrain.html i plan on porting intake and heads soon.probably when i change cam .
is there anywhere els to get series 1 aftermarket parts

Click on the Links link at the top of the page. There'* a very good reason or 5 that seriesoneperformance isn't listed there, and is no longer a recognized vendor here.


Before jumping into porting heads and such, I'd suggest alot more research and a good look at your budget, potential downtime for modding, etc.

You can get a cam from crowcams in australia, or have a custom grind done by CC or Crane. I suggest a north-american custom grind.

Rockers can be purchased from ZZP.

i cant seem to find any imformation on what size cam i can run. will this one work from ZZP
The 216/230 .507/.507 grind w/ 112LSA.

and will any parts from the series 2-3 engines interchange?