Magnaflow
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2004
Location: Lasalle, ont
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Magnaflow
I ordered a firebird/camaro magnaflow muffler for my car. I could only get 2 1/2 in. My cars pipe is 2 1/4. Wil my muffler shope be able to put this on? And should i remove resignator. I want the most sound out of my magnaflow?
#2
Senior Member
Posts like a Northstar
Join Date: Jun 2004
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
The muffler shop will have the pieces to convert from the 2.25 to 2.5. Someone else will have to answer the ressonator question.
is it going to be 2.5 the rest of the way out, or does it shrink back down? if it does that may cause some unwanted back pressure.
is it going to be 2.5 the rest of the way out, or does it shrink back down? if it does that may cause some unwanted back pressure.
#3
Junior Member
Posts like a Ricer Type-R
I have a Magnaflow setup, and my car didn't come with a resonator. (94 was the first year for that).
I'll be having a resonator installed during 'tech day' at the West Coast meet. It'* just too damn loud. I like the moderate throttle and idle sound, but not 1/2 throttle to WOT. It'* deafening.
I'll be having a resonator installed during 'tech day' at the West Coast meet. It'* just too damn loud. I like the moderate throttle and idle sound, but not 1/2 throttle to WOT. It'* deafening.
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2004
Location: Lasalle, ont
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Cheaper? He will put the one reducer on from 2.25 to 2.5 in then the dual tips are 2.25 so wouldnt he just use 2.25 piping for that? Anyone that has this setup about how much did it run them for install with tips? just curious
Thread
Thread Starter
Forum
Replies
Last Post
bonnie94ssei
Performance, Brainstorming & Tuning
4
06-19-2003 09:29 PM
BusMaster007
Performance, Brainstorming & Tuning
4
04-04-2003 01:35 AM
BusMaster007
Performance, Brainstorming & Tuning
10
03-11-2003 10:33 PM