pacesetters for Lumina SS 2001
#1
pacesetters for Lumina SS 2001
Hello there, I have a chevy Lumina SS 2001 5.7 LS1.
I don't know how many of you are familiar with this Chassis, it is the same as the holden commodore SS.
this is a picture:
http://i667.photobucket.com/albums/v...ikonD60102.jpg
I want to get some Long tube headers, probably the pacesetters. P/N: 72C2255
Do you guys know if this one fits my car? Should i order for Corvette or camaro application ? or both work ?
I am worried about the fitment.
I don't know how many of you are familiar with this Chassis, it is the same as the holden commodore SS.
this is a picture:
http://i667.photobucket.com/albums/v...ikonD60102.jpg
I want to get some Long tube headers, probably the pacesetters. P/N: 72C2255
Do you guys know if this one fits my car? Should i order for Corvette or camaro application ? or both work ?
I am worried about the fitment.
#2
Senior Member
Posts like a Turbo
Join Date: Aug 2009
Location: Indiana
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
I think that is the same as the G8.
Here are some headers for the G8.
http://www.summitracing.com/search/Y...*/?Ns=Rank|Asc
Here are some headers for the G8.
http://www.summitracing.com/search/Y...*/?Ns=Rank|Asc
#3
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Fitting the engine wont be a problem. It'* the engine bay that may need some work. Be prepared to move the O2 bung, or make room for the O2 sensor. I worked on a Vette a while back and with the headers in place, it was impossible to reach spark plug #1 because the IC compressor was in the way. Different body styles have a slightly different layout. Getting the headers in place may also be a problem. You may have to play around with getting them in to place. Don't be afraid to come in from the bottom. You may need to lower the subframe.
#4
Thanks for your reply, i don;t want any headers that needs adjusting the engine bay or anything else. the o2 sensors are no problem, Weirdly enought, my car model came without 02 sensors.
#5
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
For the most part, you should be OK, but I can't say for sure as I have never installed a set in the body style. But if there is one thing I have learned, when installing your first set of headers, be sure to have a lot of colorful words lined up, your going to use every last one of them.
#9
Senior Member
Posts like a Northstar
I think the GTO route would work...the engine bays look to be about the same size and the exact layout on the inside too....The only difference between the GTO/Monaro coupe and your Lumina SS looks to be the length of the chassis. Just something to look into...
#10
Senior Member
Posts like a Northstar
If it'* a right hand drive car, it may not be the same fitment....