manual trans
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
manual trans
with all the mods available from vendors for the 3800 I am surprised there isnt a kit for a manual transmission. Now that you can get a custom PCM for cheap you could have INTENSE delete all the tranny codes for you. Whats the hold up?
#2
A lot more is involved.
You'd need a new pedal assembly, and all the cutting of metal to get it to fit. And also there would be a need to run the clutch cable.
I'm sure there are a million other little details that need working out. :?
You'd need a new pedal assembly, and all the cutting of metal to get it to fit. And also there would be a need to run the clutch cable.
I'm sure there are a million other little details that need working out. :?
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
it would be so much fun to have a manual with these engines...we would probably burn through clutches like crazy.
#4
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
I think that a manual bonne would be so much fun. I would enjoy that a lot more than an auto. Actually an aftermarket transmission where you can tap a paddle to shift would be a lot of fun, especially for some of bonnes that never had that as an option.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
you could probably wire it correctly if you knew what to look for (INTENSE take a hint ) A wiring kit for TapShift would be sweet!
Thread
Thread Starter
Forum
Replies
Last Post