Got my AeroForce
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2004
Location: Wappingers Falls, NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Got my AeroForce
I just got my AeroForce gauge from Intense and installed it in the vent like Haro and pdad, but put it in the top one to be different. It'* got a bunch of parameters that you can view. It'* very cool!
#2
Senior Member
True Car Nut
Join Date: Feb 2006
Location: Somewhere different on the globe every month....
Posts: 2,896
Likes: 0
Received 0 Likes
on
0 Posts
Just how many wires are on the back of that unit? Did you use a hole saw for the install? Kudos on the clean install.
#7
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2004
Location: Wappingers Falls, NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cheetah
Just how many wires are on the back of that unit? Did you use a hole saw for the install? Kudos on the clean install.
RPM
MPH
Intake Air Temperature
Mass Air Flow Sensor Frequency
Mass Air Flow Sensor (lb/min.)
Engine Coolant Temperature
Injector Pulse Width (bank 1 and 2 if supported)
Long Term Fuel Trim (bank 1 and 2 if supported)
Short Term Fuel Trim (bank 1 and 2 if supported)
O2 Sensor Voltage (bank 1 and 2 if supported)
Manifold Pressure in PSI (Boost pressure for factory
turbo/supercharger applications)
Ignition Advance
Knock Retard
Engine Run Time
Battery Voltage
Transmission Temperature
Idle air Control Counts
Throttle Position Percentage
Throttle Position Voltage
Engine Load
Oil pressure (some 8 cylinder engines)
Fuel economy (MPG)
Horspepower
The newer 1.4 firware version gauge that I got also has shift lights, which I don't need.
The installation directions are here.
http://www.bonnevilleclub.com/forum/...ight=aeroforce
PontiacDad did a great write up. I followed his instructions to a T, and It took me about 20 minutes to put in.
#9
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2004
Location: Wappingers Falls, NY
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
COOL! do the shift lights work though?
#10
Man those are cool. I like the fact that they're always in view on the dash and you can select any instrument reading you want. I don't think I could ever have too many instruments in my car if it was up to me!! I'd take anything I could get. If I ever get another Bonneville it would be a lower miles 2000+ SSEi and you could bet I'd be getting one of these! Looks great!!