need some info on motor mounts
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2004
Location: Lakewood, WA 98499
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
need some info on motor mounts
Bonny is acting weird. she has a jerk or better yet a bounce in the front end when i put her in gear and when she changes gears. i think it'* the tranny mount because it has alot of play in it (as much as 3 inches when in gear) anyone know of a good brand that will last.
cliff
cliff
#2
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2004
Location: Lakewood, WA 98499
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
yet another question
also does the oem style mount have a solid bolt all the way thru it or is it a bolt on each end. if it'* a bolt on each end then i'll just drill straight thru it and put a solid bolt thru it. will this work and act as a solid mount or am i just brain farting?
cliff
cliff
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2004
Location: Lakewood, WA 98499
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
just tried taking the mount off and not even a cheater bar would break it lose. gonna spray it with pb blaster and let it sit for a while and see if that helps. any help would be greatly appreciated
#4
http://www.bonnevilleclub.com/forum/...=223248#223248
There is another link within this post that should give you all the info.
You really need to do this.
There is another link within this post that should give you all the info.
You really need to do this.
Thread
Thread Starter
Forum
Replies
Last Post
killer_cr80r
Lounge
2
04-14-2004 05:18 PM