Need help FAST!
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2003
Location: Stevens Point, WI
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Need help FAST!
i just purchased an intake off eBay. the guy emailed me and wants to know this: Here is his email:
"It will fit but we need more informarion then we can predrilled the sensor
hole or a air hose(if your intake system have it) to the intake. Please let
us know the diamension of the sensor hole that your sensor need. thanks for
your reply."
Please help! i dont know this information!
"It will fit but we need more informarion then we can predrilled the sensor
hole or a air hose(if your intake system have it) to the intake. Please let
us know the diamension of the sensor hole that your sensor need. thanks for
your reply."
Please help! i dont know this information!
#2
Senior Member
Posts like a Northstar
He'* talking about the sensor near the bottom rear of your factory air filter cover - it'* on the half of the cover that'* connected to the ribbed rubber hose that connects to the throttle body.
#3
Senior Member 8-16-02
Posts like a Northstar
Join Date: Aug 2002
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
It'* the Intake Air Temp sensor. It needs a 1/2 inch (inside diameter) hole in which to fit. A rubber grommet with that dimension will be ideal. Make sure they drill closer to the filter and not the TB side of the pipe. You want that sensor as cold as you can get it if you are going to run hard. There are places you can get extension for the sensor if you need one.
http://www.pfyc.com/store/merchant.m...y_Code=GPUNDER
http://www.pfyc.com/store/merchant.m...y_Code=GPUNDER
Thread
Thread Starter
Forum
Replies
Last Post