well i think i found a magnaflow thaltll work. its 5x8x18 though, the overall all length on it is 24 inches, cause its got 3 inches of pipe on each side....all this meaning...that since the stock muffler body is 24 inches long that i should be able to fit the new one in just fine, using every last inch of stock pipe that is
the plan would be to cut the stock pipe just as close as can be to the stock muffler on the inlet side, then make up the difference on the outlet side using the stock pipe on that side, there shouldnt be any difference really, and if there were itd be my fault
but the mount on the outlet pipe cut be cutoff and re-attached to compensate....i know that makes no sense reading it, but its all up here *points to head* i promise
2000 Oldsmobile Intrigue 3.5L DOHC V6 15x,xxx miles "The Forgotten W-Body"
shaved badges, Eclipse HU, Pioneer TS-A1370R'*, Pioneer TS-A6971R'*, 20% tint, cleared corners, Silverstar Hi'*, 9005 Low'*
Fenderwell Intake, Hi-Flow Cat, U-bend delete, GMPP Handling Kit, MOOG endlinks, and 12-inch front rotors
1996 Bonneville SE RIP 157,751 miles, totaled 8/29/05