Switch Series I intake & TB with Series II?

Reply Subscribe

Thread Tools

Search this Thread

03-18-2004, 11:06 AM

dougworner

Member

Posts like a V-Tak

Thread Starter

Join Date: Mar 2004

Posts: 70

Likes: 0

Received 0 Likes on 0 Posts

Switch Series I intake & TB with Series II?

I have a '94 SSE I was wondering if it is possible to switch my Series I intake, plenum, and TB with a Series II engine?

Reply Like

03-18-2004, 11:45 AM

BonneMeMN

Senior Member

Certified Car Nut

Join Date: Jun 2003

Posts: 15,928

Likes: 0

Received 1 Like on 1 Post

No, you can't mix and match parts at all.

You don't want a series II setup either. They fail every 50-80k miles on average.

Reply Like

03-18-2004, 11:52 AM

willwren

Junior Member

Posts like a Ricer Type-R

Join Date: Aug 2002

Posts: 11

Likes: 0

Received 4 Likes on 4 Posts

Jason is right. Because the valve sequence is different between the two Series. Notice on your car the spacing of the exhaust manifold outlets is uneven? On a Series 2, they're even. The intake is the same way. Even if the bolt pattern was the same, the routing of the intake runners isn't.